Home Page
Services
Contact Us

 

Items in Cart:  

Total inc P&P:
Check Out
Special Offers
Price Battle
Lavry Engineering Blue MicPre
 

Click above to enlarge image

Price: Please click on 'add to cart' to view prices

This item usually takes 5 working days to be delivered. Add to CartView PDFPrice Battle


Product Description

The LavryBlue microphone preamplifiers have been designed to provide very clean and transparent sonic performance at a reasonable price. The LavryBlue chassis can accommodate 2 or 4 channels of mic pre’s, the typical 2X2 configuration (2A2D) can be expanded to include 2MicPre. If you already own a LavryBlue chassis this module takes 2 spaces. Plug and Play with the installation kit.

The MicPre provides state of the art noise performance that accommodates even the weakest microphone signals , and a wide input range for the strongest mic signals. Ultra-low distortions across the complete audio frequency band insure maximum signal transparency at all gain settings.

The unit is designed to yield a superior dynamic range even for high source resistance microphones. The transformer free input provides pure and transparent bass, yet it features state of the art in common mode rejection (for elimination of hum and interference pickup) exceeding transformer based units. Phantom power per channel is ultra- low noise double shunt regulated for minimum noise and channel separation.

Each channel accommodates up to 21-70dB of gain in 1dB steps. The precision gain setting is solid and reliable (not based on the use of archaic rotary switch technology). Included is a 10dB pad for lower voltage analog interfaces. Activating the pad yields 11-60dB gain.

Outside, the no-nonsense controls are extremely user-friendly. Each channel is equipped with a 2-digit gain setting display and up/down switch. The last gain settings are stored and will reappear at next use. A Gain Pad switch (per stereo pair) changes the gain range from 21-70dB to 11-60dB, for higher level inputs.

Each stereo pair has a microphone selection switch (Condenser, Dynamic or Ribbon), for microphone load optimization. Setting to “condenser” activates the phantom power. Internal jumpers allow change from balanced to unbalanced outputs, and for disabling of the phantom for powered vintage mics.

LavryBlue series converter card options include:
- M.AD824 2 channel A/D converter
- M.SYNC Master clock sync board
- M.DA824 2 channel D/A converter
- M.BY2 Synchronous Up Sample/Down Sample rate converter.
- M.PREAMP 2 channel professional microphone preamp.


Specifications

  • Noise -110dBFS (20Hz – 22KHz unweighted)
  • Distortions 1kHz tone at -1dBFS: .002%FS
    1kHz tone at -20dBFS: .0013%FS
    1kHz tone at -60dBFS: .0006%FS
  • Sample rates 96kHz, 88.1kHz, 48kHz, 44.1kHz at +/- 150ppm lock range
    (Front panel lamps indicate sample frequency)
    32-100kHz wide lock mode (varispeed)
    (Front panel-switch selection between CrystalLock™ and wide lock and narrow lock)
  • CrystalLock Master mode settings, ideally suited for single DAC (Stereo Channels),
    or Master-slave configurable suited for multiple DAC Channel
    operation. Crystal mode settings are done via a four position dip switch.
    Look for switch settings in the section “Clock Configurations”.
  • Crystal lock accuracy .1ppm / 10 sec maximum
  • Channel separation -100dBFs at 1KHz
  • Flatness response +/- .05dB (10Hz -20KHz)
  • Phase linearity 2 degrees (10Hz - 22 kHz)
  • Polarity Front panel switch selects “Pin 2 Hot” or “Pin 3 Hot”
  • Analog Outputs Balanced (maximum level of 27dBu +/-. 25dB) or Unbalanced
    (Maximum level of 21dBu +/-. 25dB). Balanced /unbalanced settings
    are user configurable via user-selectable jumpers. Unbalanced
    configuration can be made to drive pin 2 (with pin 3 grounded), or visa
    versa via the same user-selectable jumper configuration.
  • Individual analog output front panel volume control adjustments (20
    turn potentiometers for each channel) provide 0 to +24dBu range for
    balanced outputs, and –6dBu to +18dBu for unbalanced operation.
  • Digital input AES/EBU, 110 Ohm, transformer isolated
 
 

Price: Please click on 'add to cart' to view prices

This item usually takes 5 working days to be delivered. Add to CartView PDFPrice Battle

 
About Us