Tonelux AUX1 - Bus Access Module

The Tonelux AUX1 is a simple BUS access module that allows the user to insert an additional mixer, mic pre, etc. into the Tonelux Mix Bus. Each input is balanced and is calibrated for a level of +4 dBu.

£230.00 inc VAT

Tonelux CR2 - Control Room Monitor

The CR2 is a control room monitor module that has four stereo inputs and an internal Stereo Mix Bus. The CR2 uses a discrete signal path for superb sonic quality. Features include: AFL stereo level, 2 speaker outputs, mono compatibility switch, & L/R Speaker cut switches.

£640.00 inc VAT

Tonelux EQ4P - Parametric EQ

The EQ4P is a Parametric Equalizer that features a filter Q control that is in relation to the Boost and Cut control. The EQ4P also uses a "Constant Energy Curve" that keeps the bandwidth wider at lower boost or cut levels and becomes narrow at higher boost or cut levels.

£659.00 inc VAT

Tonelux FX2 - Dual Mono Line Mixer

The FX2 is a dual mono input line mixer with a pair of level controls and panners and a unique MUTE circuit that when pressed, the LED turns RED, but when the module is ON, the LED acts as a level presence indicator

£304.00 inc VAT

Tonelux FX2+ - Dual Mixer & AUX MSTR

The Tonelux FX2+ has all the same functions as the FX2 featured above, but also includes "AUX MSTR" which is an OPTIONAL send master, that can be used in place of the SM1 or SM2 bus master when rack space is low.

£349.00 inc VAT

Tonelux MP1 - MicPre & DI

The Tonelux MP1, Mic Preamp & DI module features: transformer coupled in and out, 20 dB PAD switch, a 48V Phantom switch and a Phase or POLARITY switch. The RP1 remote controlled version is also available.

£519.00 inc VAT

Tonelux MX2 - Mono Line Mixer

The MX2 is a mono input line mixer that has a unique MUTE circuit that when pressed, the LED turns red, but when switched ON, the LED acts as a level presence indicator, illuminating green to show signal presence.

£319.00 inc VAT

Tonelux MX5.1 - Surround Line Mixer

The Tonelux MX5.1 module is a SURROUND mono input line mixer that has a unique MUTE circuit that when pressed, the LED turns red, but when the module is ON, the LED turns green & acts as a level presence indicator.

£345.00 inc VAT

Tonelux SM1 - Mono Summing Module

The SM1 is a Mono Summing module, with a selectable input (on the PC board with jumpers) so you can grab any bus and use the SM1 as the summing master for the bus, such as Sends, Center Channel, LFE, PFL, etc.

£289.00 inc VAT

Tonelux SM2 - Stereo Summing Module

The Tonelux SM2 is a Discrete Stereo Summing module, with selectable inputs so you can grab any pair of bus and use the SM2 as the summing master for the Stereo bus, Surround Bus or the Solo Bus, etc.

£659.00 inc VAT

Tonelux FD1 - 100mm Fader Module

The Tonelux FD1 Fader is a mono 100mm fader. The price includes a 2 foot TRS cable that plugs into the rear of the MX2, MX5.2 or the SM1, SM2 as well as the FX2 external fader jack on the rear of the VRACK.

£189.00 inc VAT

Tonelux FRACK - Fader Rack

The Tonelux FRACK is an extra 1U in size compared to the VRACK and has been designed especially to accomodate the Tonelux FD1 and FD2 '100mm' Faders. The FRACK can hold up to 16 FD1 fader modules.

£199.00 inc VAT

Tonelux VRACK - PSU Not Included

The Tonelux VRACK is a 16 possition rack designed to accomodate all the varios Tonelux modules. The VRACK rack uses D-Sub connectors for connecting balanced and unbalanced inputs and outputs, aswell as sends, returns, and the link busses for multiple racks.

£349.00 inc VAT